- 您现在的位置：买卖IC网 > Sheet目录203 > APS INT2012 (Tripp Lite)INVERTER 2000W 230VAC OUT
Overload protection
Outlet quantity / type
INPUT
Nominal Input Voltage(s) Supported
Recommended Electrical Service
Maximum input amps / watts
Input connection type
Voltage compatibility (VAC)
Voltage compatibility (VDC)
BATTERY
Expandable battery runtime
DC system voltage (VDC)
Battery Pack Accessory (optional)
Battery charge
Includes 25A input breaker dedicated to the charging system and 20A output breaker for AC output loads
Hardwire
120V AC
DC INPUT: Requires 12V DC input source capable of delivering 192A for the required duration (when used at full
continuous capacity - DC requirements increase during Over-Power and Double-Boost operation).
DC INPUT: Full continuous load - 192A at 12V DC. AC INPUT: 38 amps at 120V AC with full inverter and charger
load (21A max charger-only / combined input load to support charger and AC output is automatically controllable to
66%-33%-0% based on AC output l
DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: Hardwire via built in junction box with cover plate. User
supplies cabling. 4 gauge or larger (see manual). AC INPUT: user supplies hardwire input cabling.
120
12
Runtime is expandable with any number of user supplied wet or gel type batteries
12
98-121 sealed lead acid battery (optional)
25A/100A (selectable)
LEDS ALARMS & SWITCHES
3 position on/off/remote switch enables simple on/off power control plus "auto/remote" setting that enables distant
Switches
Front panel LEDs
SURGE / NOISE SUPPRESSION
AC suppression joule rating
PHYSICAL
Shipping Dimensions (HWD/in)
Shipping Dimensions (HWD/cm)
Shipping weight (lbs)
Shipping weight (kg)
Unit Dimensions (HWD/in)
Unit Dimensions (HWD/cm)
Unit weight (lbs)
on/off control of the inverter system when used in conjunction with optional APSRM4 accessory when used in
inverter mode. In AC uninterruptible power mode, "auto/remote" setting enables automatic transfer from line power
to battery power - to maintain continuous AC power to connected loads.
Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7
levels reported). See manual for sequences.
600
13.25 x 15 x 21.5
33.66 x 38.1 x 54.61
43.2
19.6
7.25 x 8.5 x 16.25
18.42 x 21.59 x 41.28
40
3 / 5
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
APS1012
INVERTR 1000W 12VDC 2OUT W/CHRGR
APS1250
INVERTER W/BATT CHARGE 1250W
APS1524
INVERTER 1500W HARDWIRE OUTPUT
APS2424
INVERTR 2400W 24VDC W/CHRGR
APS2448UL
INVERTER 2400W 48VDC OR 120VAC
APS3636VR
INVERTER 3600W 36VDC OR 120VAC
APS512
INVERTER 500W 12VDC 2OUT W/CHRGR
APS612
INVERTER 600W 12VDC 2OUT W/CHRGR
相关代理商/技术参数
APS INT2424
功能描述:功率调节 2400 continuous watts 3600 overpower watts 4800 doubleboost watts Hardwired 2400VA, 24V DC, RJ45 remote port. 30/7.5-amp (selectable) regulated charger. RoHS:否 制造商:Power-One 输入电压（标称）: 输出电压: 输出功率: 电压调节准确度: 出口数量: 特点: 安装类型:
APS INT3636VR
功能描述:功率调节 3600 continuous watts 5400 overpower watts 7200 doubleboost watts Hardwired 3600VA, 36V DC, RJ45 remote port. 30-amp (selectable) regulated charger. Voltage regulated. RoHS:否 制造商:Power-One 输入电压（标称）: 输出电压: 输出功率: 电压调节准确度: 出口数量: 特点: 安装类型:
APS006N
制造商:IDEC CORPORATION 功能描述:TWS
APS00A
功能描述:板机接口移动感应器和位置传感器 1ST LEVEL VEH POS RoHS:否 制造商:Panasonic Electric Works 封装 / 箱体:TO-5 感应距离:3 m 输出类型:Digital 电源电压-最大:6 V 电源电压-最小:2.3 V 电源电流: 最大工作温度:+ 60 C 封装:Bulk
APS00B
功能描述:板机接口移动感应器和位置传感器 8 PIN SOIC SMT HIGH RES MAGNETIC
RoHS:否 制造商:Panasonic Electric Works 封装 / 箱体:TO-5 感应距离:3 m 输出类型:Digital 电源电压-最大:6 V 电源电压-最小:2.3 V 电源电流: 最大工作温度:+ 60 C 封装:Bulk
APS00B
制造商:Honeywell Sensing and Control 功能描述:MAGNETIC HALL-EFFECT POSITION SENSOR 制造商:Honeywell Sensing and Control 功能描述:IC, HALL EFFECT SENSOR, BIPOLAR, 8-SOIC
APS00B-T13
制造商:HONEYWELL-ACC 制造商全称:Honeywell Accelerometers 功能描述:High Resolution Magnetic Angular Position Sensor IC
APS00M
功能描述:板机接口移动感应器和位置传感器 COMM SOLID STATE/MAG RoHS:否 制造商:Panasonic Electric Works 封装 / 箱体:TO-5 感应距离:3 m 输出类型:Digital 电源电压-最大:6 V 电源电压-最小:2.3 V 电源电流: 最大工作温度:+ 60 C 封装:Bulk